On 8/13/05, Tee Cashmore <teecashmore@xxxxxx> wrote: >=20 > On 13-Aug-05, at 7:36 AM, Tim Kearn wrote: >=20 > > Have a D-Link router and trying to use it with my iBook (10.3). > > The iBook recognizes it under the network preferences (using DHCP) and > > am able to log into the site to configure it. > > But, the problem is that is as far as it gets. The router won't > > connect using PPPoE. There are no numbers listed for the router (IP > > address, subnet, etc) on the page as their are in the network > > preferences. > > Any ideas? > > Tim I presume that you figured out your problem. The router won't show you IP and mask values if it hasn't established a PPPoE connection with Sympatico's servers (or whoever is your ISP). > What are you hooked up to? If DSL you don't use PPPoE, just settings in > TCP/IP. Settings should be "Automatic" under "Location" in "Network" & > "Show" should read "Built in Ethernet". HTH. > TTFN, > TeeC Hmm? I'm using DSL and have to use PPPoE ;-). Eric. _________________________________________________ For information concerning the MUGLO List just click on http://muglo.on.ca/Pages/joinus.html Our Archives can be viewed at //www.freelists.org/archives/muglo Don't forget to periodically check our web site at: http://muglo.on.ca/