[AR] Re: Electroforming Experiment
- From: Uwe Klein <uwe@xxxxxxxxxxxxxxxxxxx>
- To: arocket@xxxxxxxxxxxxx
- Date: Sat, 13 Jul 2019 19:38:39 +0200
Am 13.07.2019 um 19:16 schrieb Ed LeBouthillier:
On Sat, 2019-07-13 at 17:00 +0100, Peter Fairbrother wrote:
It is hard to get good channel walls that way. If you use a thin
layer the copper will overflow and thin, and eventually close, the
channels.
I've considered other approaches.
You could use low melting metal wire (Bismuth used for fully metal
vacuum sealing ) to define the channels.
electroplate and then melt out the "lost wires".
( any conductive wax around that produces a low viscosity fluid on
heating up? )
on another track:
fine tubing is easily available.
Then coate via:
https://www.castolin.com/Coating-Equipment/
metal powder "spray on" or a comparable process.
Uwe
Other related posts:
