Ben Brockert wrote: > You can also weld normal AN fittings together to make new and weird > fittings. A plug welded to a short nipple would accomplish what you're > asking for. Yeah - I'm pretty sure that the individual bits would be available as separate fittings (i.e., 1/4" NPT pipe thread plug and AN-4 blank "cap"; why the need to have both on the same fitting? Is the plan perhaps to start with a solid fitting and drill a small orifice or something? -dave w > > Or tap an AN-4 to 1/4npt nipple on the NPT side and screw in a socket > cap screw to accomplish the same thing with hand tools and no welder > or lathe. > > On Fri, Oct 11, 2013 at 12:51 PM, Ed Kelleher > <Pres@xxxxxxxxxxxxxxxxxxxxx> wrote: >> Are blank AN/JIC flare fittings available? >> >> Fittings with no holes through them. Preferably aluminum. >> >> Like a male NPT union with a 1/4" tube flare on one end and a 1/4" NPT on >> the other, but with no central hole? >> >> Ed Kelleher >> >> > >