I believe my intentions were clearly stated in my original post. How or why I
want to know this should not really be the question because if a solution to my
stated question can not be determined, then anything else I may want to
accomplish is mute.
John
Sent from my iPhone
On Jul 27, 2019, at 6:35 PM, Elliot Robert <elliotr@xxxxxxxxx> wrote:
"Please stick to the topic or move on."
You might find it easier to get people to entertain your development plans if
you gave them some tangible reason to see what you see in this unusual
propulsion setup. If fokes are politely questioning the assumption that this
propulsion technology is worth while by simply pointing out a lack of
performance and you're annoyed they'd dare point out better ways to reach the
same objective, I have to wonder what exactly is the point of your interest
in the subject? To create a rocket with an odd propulsion setup for the sake
of spectacle? if so, it might be better to state that objective clearly
rather than try to police you're own post from any deviation of unsaid end
goal.
On Sat, Jul 27, 2019 at 4:55 PM <anthony@xxxxxxxxxxx> wrote:
I’ll do it for $250/hr. but I have a 15 minute maximum. ADD apparently.:-)))
Anthony J. Cesaroni
President/CEO
Cesaroni Technology/Cesaroni Aerospace
http://www.cesaronitech.com/
(941) 360-3100 x101 Sarasota
(905) 887-2370 x222 Toronto
From: arocket-bounce@xxxxxxxxxxxxx <arocket-bounce@xxxxxxxxxxxxx> On Behalf
Of Ben Brockert
Sent: Saturday, July 27, 2019 5:09 PM
To: arocket@xxxxxxxxxxxxx
Subject: [AR] Re: exothermic heating of water
On Saturday, July 27, 2019, Redacted sender jkraieski for DMARC
<dmarc-noreply@xxxxxxxxxxxxx> wrote:
Please stick to the topic or move on.
This is ARocket, a gaggle of easily distracted internet know-it-alls that
occasionally talks about amateur rockets. If you’re looking for dedicated
on-topic support for your problem, many of us are available for contracting.
My rate is $280/hour, 8 hour minimum.
Regards,
Ben
