[AR] Re: exothermic heating of water

  • From: Terry McCreary <tmccreary@xxxxxxxxxxxxxxx>
  • To: arocket@xxxxxxxxxxxxx
  • Date: Mon, 29 Jul 2019 07:55:45 -0500

About 25 years ago, Tom Pickens(?) flew a fair-sized steam rocket at the first Tripoli launch I attended.  Electrically heated.  It was at an away pad, so when he launched it there was a huge white cloud but was almost silent (at that distance).

If memory serves, the water was heated and pressure built up by electrolysis.  If that's correct, it's no wonder that the thing was far away.  Stoichiometric mix of hydrogen and oxygen gases under high pressure and elevated temperature...

Best -- Terry

On 7/29/2019 1:34 AM, Bruno Berger wrote:


Am 29.07.19 um 08:22 schrieb Uwe Klein:
Am 28.07.2019 um 19:25 schrieb Keith Henson:
Back in the 1960s, I worked out a steam rocket, based an H oxygen
cylinder almost full of water.  The only thing I remember after all
this time was the estimate that it would reach 20,000 feet.  (This
might be wrong, and no, I am not going to reconstruct the math.)

The design was an H cylinder in a launch cradle with a bunch of
_propane heaters_.
Method of choice: electrothermal heating

Uwe
We did quite a lot with steam rockets. A 50 kN thruster to push around a
car from one of the German premium car builders. They wanted to simulate
side impacts with it. Worked quite well... and yes it was heated
electrically. It needed about half an hour to get the 25 kg water to 250 °C

Bruno


"At that time [1909] the chief engineer was almost always the chief test
pilot as well. That had the fortunate result of eliminating poor
engineering early in aviation" (Igor Sikorsky)

--
Dr. Terry McCreary
Professor Emeritus
Murray State University
Murray KY  42071


Other related posts: