I’m flying a 152mm 2 grain motor in a couple weeks, first tested years ago. Case is 6061-t6, liner is cardboard wrapped with 1/16”epdm sheet. I can’t recall ever seeing phenolic liners in the 6”size. Would have to be a custom item. From: arocket-bounce@xxxxxxxxxxxxx [mailto:arocket-bounce@xxxxxxxxxxxxx] On Behalf Of Bill Claybaugh Sent: Wednesday, October 16, 2013 1:18 PM To: arocket@xxxxxxxxxxxxx Cc: Arocket List Subject: [AR] Re: Larger size motor case liners Cases--which are also the airframe--are 6061-T6; liner is cast in place EPDM. Grain is a center burning finocyl, also cast in place. Bill Sent from my iPhone On Oct 16, 2013, at 15:56, Daryle Dismukes <daryled@xxxxxxxxx <mailto:daryled@xxxxxxxxx> > wrote: Those of you who are working with fuel grains in the 150mm / 5.5-6 inch diameter range, what are you using for your motor cases and liners? The largest I've done before is 98mm, and I used as much off the shelf Aerotech hardware as I could. Now I need to do something larger in a hurry at work and I'm hoping to find a source of pre-made carbon phenolic tubes between 5.5 to 6 inches in diameter. Any sources or ideas? Other things to try? -Daryle