On 2/28/06, Tee Cashmore <teecashmore@xxxxxx> wrote: > > On 28-Feb-06, at 10:06 PM, Eric Dunbar wrote: > > > Tim: in this case you'll need an adapter to allow your 2.5" drive to > > connect to the 3.5" drive connector. Take a look at > > <http://www.usbwholesale.com/adt%20adapter.htm>. > > According to all the sites I've checked before & now, the Clamshell > takes a 2.5" 9mm drive. The drive I sold Tim was the correct one & > identical to the one my neighbour installed in his daughters clamshell. > I never installed one, so I don't know how, but the instructions I > downloaded for Tim did show how. The 10 Gig was from my Titanium, which > takes the same drive, which I replaced with a 30 Gig from OWC. > Installing into an external case is quite a different kettle of fish. > The connections are quite different & I'm pretty sure that Cutting Edge > Computers on Adelaide Street have the right cable Tim. ...a connector as per the URL above ;-) _________________________________________________ For information concerning the MUGLO List just click on http://www.freewebs.com/muglo/joinus.html Our Archives can be viewed at //www.freelists.org/archives/muglo Don't forget to periodically check our web site at: http://www.freewebs.com/muglo/