[bksvol-discuss] Re: Reading stars within Kurzweil 1000
- From: "Jake Brownell" <jabrown@xxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Fri, 5 Aug 2005 15:57:39 -0500
Hi Stephen,
Is there a way to do searching for these character strings other than by
hand? If there were a client that could auto detect these, I'd be happy to
run it in the background so it can use my idle CPU. (Its being used now by
the Distributed.Net projects).
Best,
Jake
www.JBrownell.com
----- Original Message -----
From: "Stephen Baum" <steve@xxxxxxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Friday, August 05, 2005 10:40 AM
Subject: [bksvol-discuss] Re: Reading stars within Kurzweil 1000
> Unfortunately, ViaVoice has a number of parsing problems, and various odd
> combinations of characters can cause it to jabber endlessly, or even to
> crash. We actually spent a few weeks running every possible four character
> combination through it, and filter out the ones that cause crashes.
> Unfortunately, we can't afford the months or years it would take to do
> sequences above four letters.
>
> Stephen
>
> At 11:33 AM 8/5/2005, you wrote:
> >Yes, I have no problem locating extraineous punctuation with punctuation
> >set to some. I can only edit using Via Voice, because nothing else that
> >works with Kurzweil handles all the punctuation so well. An entire line
> >of the same punctuation marks read line by line is the only exception,
and
> >when I come accross that strange silence I examine it character by
> >character to see if I should delete it or not. Of course this is using
> >Kurzweil 9.
> >
> >Via Voice does have a problem occasionally when it tries to read strings
> >made up of some numbers combined with punctuation. I suppose it is
> >accidently being sent some kind of control code and then goes nuts. I
> >just stop the meaningless jabber and look at the problem area character
by
> >character. I suppose it would take forever to figure out all the strings
> >that could be a problem, and then figure out some way to fix them. I
just
> >hope it never does it in an MP3 created from a book. :-)
> >
> >Sarah Van Oosterwijck
> >Assistive Technology Trainer
> >http://home.earthlink.net/~netentity
> >
> >
> >----- Original Message ----- From: "Stephen Baum" <steve@xxxxxxxxxxxxxxx>
> >To: <bksvol-discuss@xxxxxxxxxxxxx>
> >Sent: Friday, August 05, 2005 9:50 AM
> >Subject: [bksvol-discuss] Re: Reading stars within Kurzweil 1000
> >
> >
> >>If your punctuation level is set to "some" in Kurzweil 1000, then the
> >>speech engine is sent the text more or less unmodified, and it says what
> >>it wishes to say. VoiceText (also called NeoSpeech) tends not to
> >>pronounce standalone punctuation. IBM ViaVoice, on the other hand, does.
> >>So you would find that if you use IBM ViaVoice, it will read the
punctuation.
> >>
> >>If your punctuation level is set to "all", then, of course, the
> >>punctuation characters should always be read. That seems to be the case,
> >>at least with version 10 which is what I have on my system. It is
> >>certainly the case, even with earlier versions, when reading
> >>continuously. Moving a line at a time is sort of a special case, in that
> >>the message voice is usually used rather than the reading voice. Again,
> >>though, this seems to work correctly in version 10.
> >>
> >>Stephen
> >>
> >>At 10:36 PM 8/4/2005, you wrote:
> >>> Now that you mention it, it would be nice to have a setting that
would
> >>>cause K1k to read things like slashes. That would make it easier to
find
> >>>junk characters and get rid of them.
> >>>
> >>>Paula
> >>>
> >>>----- Original Message -----
> >>>From: "Shelley L. Rhodes" <juddysbuddy@xxxxxxxxxxxx>
> >>>To: <bksvol-discuss@xxxxxxxxxxxxx>
> >>>Sent: Thursday, August 04, 2005 9:21 PM
> >>>Subject: [bksvol-discuss] Re: Reading stars within Kurzweil 1000
> >>>
> >>>
> >>> > It also refuses to read slashes, and backslashes even with Read all
> >>> > punctuation on, if I land on the line they are on.
> >>> >
> >>> > Strange.
> >>> >
> >>> > Shelley L. Rhodes and Judson, guiding golden
> >>> > juddysbuddy@xxxxxxxxxxxx
> >>> > Guide Dogs For the Blind Inc.
> >>> > Graduate Advisory Council
> >>> > www.guidedogs.com
> >>> >
> >>> > The vision must be followed by the venture. It is not enough to
> >>> > stare up the steps - we must step up the stairs.
> >>> >
> >>> > -- Vance Havner
> >>> > ----- Original Message -----
> >>> > From: "Sarah Van Oosterwijck" <curiousentity@xxxxxxxxxxxxx>
> >>> > To: <bksvol-discuss@xxxxxxxxxxxxx>
> >>> > Sent: Thursday, August 04, 2005 1:34 PM
> >>> > Subject: [bksvol-discuss] Re: Reading stars within Kurzweil 1000
> >>> >
> >>> >
> >>> > Kurzweil should read the three stars when you are reading >
> >>> continuously. I
> >>> > don't know why it doesn't read them when you try to read the line
> >>> they > are
> >>> > on when nothing else is on that line.
> >>> > You can read them character by character, though. It's not your >
> >>> settings,
> >>> > it just behaves that way.
> >>> >
> >>> > Sarah Van Oosterwijck
> >>> > Assistive Technology Trainer
> >>> > http://home.earthlink.net/~netentity
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > --
> >>> > No virus found in this incoming message.
> >>> > Checked by AVG Anti-Virus.
> >>> > Version: 7.0.338 / Virus Database: 267.10.0/63 - Release Date: >
8/3/2005
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>
> >>
> >>
> >>
> >>--
> >>No virus found in this incoming message.
> >>Checked by AVG Anti-Virus.
> >>Version: 7.0.338 / Virus Database: 267.10.1/64 - Release Date: 8/4/2005
> >>
> >
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.338 / Virus Database: 267.10.1/64 - Release Date: 8/4/2005
>
>
Other related posts:
