[optacon-l] Re: I think there's something missing
- From: "Cindy Handel" <cindy425@xxxxxxxxxxx>
- To: <optacon-l@xxxxxxxxxxxxx>
- Date: Sat, 26 Jul 2008 10:35:18 -0400
They're not actually wheels. There are two metal bars/rollers, one on each
side of the camera. These allow the camera to glide across the page.
Cindy
----- Original Message -----
From: "Vince Mistretta" <vmistretta1411@xxxxxxxxx>
To: <optacon-l@xxxxxxxxxxxxx>
Sent: Saturday, July 26, 2008 9:23 AM
Subject: [optacon-l] I think there's something missing
After reading the manual which I found on Freedom Scientific's site as
reference, I looked at the Retina / camera lens unit and I think there is
something missing.
According to the manual, the camera should have wheels on it to roll across
the page. I don't find any wheels on this unit. I removed the lens from
the cable as instructed and her is what I find...
A long metal object with a slider on top which has three markings on the
right side. On the bottom side theres a recessed portion at the tip then a
raise portion longer than the recessed which has a square hole towards the
tip directly under the slider, a rough area then two rectangular holes
towards the cable connection. The area with the holes has a ridge on either
side which has a lip or recess within as if it will hold something. I feel
no wheels at all.
Am I missing something here?
Vince Mistretta
Cellular - 561-234-7631
Skype - vin5451
To unsubscribe at any time, just send a message to:
optacon-l-request@xxxxxxxxxxxxx with the word "unsubscribe" (without the
quotes) in the message subject.
Tell your friends about the list. They can subscribe by sending a message
to:
optacon-l-request@xxxxxxxxxxxxx with the word "subscribe" (without the
quotes) in the message subject.
To unsubscribe at any time, just send a message to:
optacon-l-request@xxxxxxxxxxxxx with the word "unsubscribe" (without the
quotes) in the message subject.
Tell your friends about the list. They can subscribe by sending a message to:
optacon-l-request@xxxxxxxxxxxxx with the word "subscribe" (without the quotes)
in the message subject.
Other related posts:
