[AR] Re: Ceramic tooling.

From: Jonathan Goff <jongoff@xxxxxxxxx>
To: arocket@xxxxxxxxxxxxx
Date: Tue, 21 Jan 2020 22:10:36 -0700

Anthony,

Very cool! Thanks for sharing the technique.

~Jon

On Tue, Jan 21, 2020 at 8:21 PM Anthony Cesaroni <anthony@xxxxxxxxxxx>
wrote:

This is a cool new approach to trapped tooling that we’ve been using with
good success. The hi-temperature mandrel material is a water washable
ceramic. Integrated rubber insulation, nozzle and forward closure with
tow-preg lamina in a nonlinear wind. Wind it, cure it and stick a water
hose in the end…done. Hydrostat and fuel it.

Spyder stage 3 and 4 motors. The mandrel is shown at the bottom with
Teflon tape applied prior to winding. State of the art. It can be used for
many composite applications.

Anthony J. Cesaroni

President/CEO

Cesaroni Technology/Cesaroni Aerospace

http://www.cesaronitech.com/

(941) 360-3100 x101 Sarasota

(905) 887-2370 x222 Toronto

References:
- [AR] Ceramic tooling.
  - From: Anthony Cesaroni

[AR] Re: Ceramic tooling.

Other related posts: