Didn't watch the entire video so don't know exactly what you did, but it
was great. But, while sitting on the launch pad your flight software should
be integrating errors out of the accelerators while motionless, figure out
where gravity is, calibrating and aligning . After liftoff, the errors
should be integrated to re-trim the Thrust Vector through the C.G. so the
Rocket fly's straight instead of at an offset.
Have you thought about using an Android Phone for your On-Board Computer
and Sensors? It could reduce your overall mass of the individual
components. Most phones have a fairly complete suite of sensors including
dual cameras, multiple radios, 3-axis accelerometers, 3-axis gyroscope,
3-axis Magnetometer, barometer, usb interface, fast multi-core
processors... The phone would still need an interface board (usb) to read
(sensors) and write (commands) to the rocket hardware.
https://source.android.com/devices/sensors/sensor-types
https://www.xda-developers.com/
On Thu, Jul 4, 2019 at 9:51 AM Joe Barnard <joe@bps.space> wrote:
Hey that’s mine! More luck than anything, the thrust curve matched the
prop mass loss really well. TVC setpoints were a little off which is why
you see the slide to the right.
Joe Barnard
https://bps.space
On Wed, Jul 3, 2019 at 9:31 PM Craig Fink <webegood@xxxxxxxxx> wrote:
LOL, ......That's not Good....... That's great!
https://www.youtube.com/watch?v=s9aTd29t2dg&t=2542
--
Craig Fink
WeBeGood@xxxxxxxxx
